DUCATI ALLDUCKS 6203 blue, red, transparent compatible CLONE remote control replacement transmitter, 433,92Mhz fixed code clone!!!

DUCATI ALLDUCKS 6203 blue, red, transparent compatible CLONE remote control replacement transmitter, 433,92Mhz fixed code clone!!!

DUCATI ALLDUCKS 6203 blue, red, transparent compatible CLONE remote control replacement transmitter, 433,92Mhz fixed code clone!!!

  • Great value, High quality DUCATI 433,92Mhz fixed code compatible clone remote control!!!
  • Latest 2017 technology, 4-channel fixed code remote control, which can be used with many of the garage and gate automation systems !!!
  • Fast cloning procedure. It clones within 10 seconds!!!
  • How to clone your remote, with an easy programming videos: www.youtube.com/watch?v=rfua7-VTJp4 or www.youtube.com/watch?v=-sDjb0XUl0Y
  • Distance: Extra Long Range !!! Up to 100 meters!!! EVEN BETTER QUALITY, THAN THE ORIGINAL DUCATI REMOTE !!!

This is top-quality clone remote, which will clone your DUCATI ALLDUCKS 6203 / ALLDUCKS TE2 / RONDY TPR10-A / RONDY TPR20-A / TSAW1 / TSAW2 / TSAW3 / TSAW4 / TSAW2 N / Ducati TSAW4 N 433,92MHz fixed code remote controls. With this remote cloner, you can clone all 433.92MHz fixed code key fobs. How to clone your remote, with these easy programming videos: • www.youtube.com/watch?v=rfua7-VTJp4 or www.youtube.com/watch?v=-sDjb0XUl0Y . Follow these easy steps to program your remote; • You need to erase the remote first : 1) Press and Hold Lock and Unlock buttons together (Led will flash 3 times) 2) Keep holding lock button, press unlock button 3 times, LED will start Flashing Non-Stop. Now remote is clear and ready for cloning • Next you need to clone your original remote : 1) Put both (ORIGINAL and CLONE) remotes Into “Back to Back position ( II )” or “Side-by-Side”. Make sure they have direct contact , touching, push a bit to make them touch each other harder. 2) Press and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until led will make : 2 blinks – 3 blinks- Steady = Successfully cloned, only after the light goes into steady. • If for some reason the clone does not go further then 2 blinks , it means the signal does not go through, please slide the remote slowly up and down, until you get the point where it will go through. • Note: you don’t need an access to you control board or receiver!!! If you want to increase the remote control reception range up to 150-200 meters, then you can connect this aerial: www.amazon.com/dp/B01MSRPVD2 . WE ARE TOTALLY COMMITTED TO 100% CUSTOMER SATISFACTION !!!

List Price: $ 12.90

Price: $ 12.90

Add a Comment

Your email address will not be published.

fiverr instagram bot

Fiverr Bot Message

Translate »